Skip to content Skip to main navigation Skip to footer

Linux:Sublime Text 2 设置文件详解

Sublime Text 2是那种让人会一眼就爱上的编辑器,不仅GUI让人眼前一亮,功能更是没的说,拓展性目前来说也完全够用了,网上介绍软件的文章推荐插件的文章也不少,而且很不错,大家可以去找找自己需要的。而且 Linux 支持也做的非常好。

之前想设置什么都是直接在网上搜,但最近想调行距,这个把我给难住了,软件上的设置没找到,网上搜也没有,最后的最后在Sublime的官方论坛找到了,个人觉得行距还是很影响视觉体验的,看看下面的对比图就知道了:

Sublime Text 2 设置文件详解

看来想驾驭好这软件不弄清楚配置文件是不行了,周末找了时间把配置文件的每条配置信息都加上了中文注释,现在贴出来和大家共享,里面有解释不清楚的也欢迎大家伙来互相讨论:)

另外,这也是我的第一篇博客,以后我会多写些前端方面的文章和大家共享,欢迎一起讨论:)

Preferences.sublime-settings文件:

// While you can edit this file, it’s best to put your changes in // “User/Preferences.sublime-settings”, which overrides the settings in here. // // Settings may also be placed in file type specific options files, for // example, in Packages/Python/Python.sublime-settings for python files. { // Sets the colors used within the text area // 主题文件的路径 “color_scheme”: “Packages/Color Scheme – Default/Monokai.tmTheme”,

// Note that the font_face and font_size are overriden in the platform // specific settings file, for example, “Preferences (Linux).sublime-settings”. // Because of this, setting them here will have no effect: you must set them // in your User File Preferences. // 设置字体和大小,必须在Settings-User里重写,这里设置没有任何效果 “font_face”: “Consolas”, “font_size”: 12,

// Valid options are “no_bold”, “no_italic”, “no_antialias”, “gray_antialias”, // “subpixel_antialias” and “no_round” (OS X only) // 字体选项:no_bold不显示粗体字,no_italic不显示斜体字,no_antialias和no_antialias关闭反锯齿 // subpixel_antialias和no_round是OS X系统独有的 “font_options”: [],

// Characters that are considered to separate words // 在文字上双击会全选当前的内容,如果里面出现以下字符,就会被截断 “word_separators”: “./\\()\”‘-:,.;<>~!@#$%^&*|+=[]{}`~?”,

// Set to false to prevent line numbers being drawn in the gutter // 是否显示行号 “line_numbers”: true,

// Set to false to hide the gutter altogether // 是否显示行号边栏 “gutter”: true,

// Spacing between the gutter and the text // 行号边栏和文字的间距 “margin”: 4,

// Fold buttons are the triangles shown in the gutter to fold regions of text // 是否显示代码折叠按钮 “fold_buttons”: true,

// Hides the fold buttons unless the mouse is over the gutter // 不管鼠标在不在行号边栏,代码折叠按钮一直显示 “fade_fold_buttons”: true,

// Columns in which to display vertical rulers //列显示垂直标尺,在中括号里填入数字,宽度按字符计算 “rulers”: [],

// Set to true to turn spell checking on by default // 是否打开拼写检查 “spell_check”: false,

// The number of spaces a tab is considered equal to // Tab键制表符宽度 “tab_size”: 4,

// Set to true to insert spaces when tab is pressed // 设为true时,缩进和遇到Tab键时使用空格替代 “translate_tabs_to_spaces”: false,

// If translate_tabs_to_spaces is true, use_tab_stops will make tab and // backspace insert/delete up to the next tabstop // translate_tabs_to_spaces设置为true,Tab和Backspace的删除/插入作用于制表符宽度 // 否则作用于单个空格 “use_tab_stops”: true,

// Set to false to disable detection of tabs vs. spaces on load // false时禁止在载入的时候检测制表符和空格 “detect_indentation”: true,

// Calculates indentation automatically when pressing enter // 按回车时,自动与制表位对齐 “auto_indent”: true,

// Makes auto indent a little smarter, e.g., by indenting the next line // after an if statement in C. Requires auto_indent to be enabled. //针对C语言的 “smart_indent”: false,

// Adds whitespace up to the first open bracket when indenting. Requires // auto_indent to be enabled. // 需要启用auto_indent,第一次打开括号缩进时插入空格?(没测试出来效果…) “indent_to_bracket”: true,

// Trims white space added by auto_indent when moving the caret off the // line. // 显示对齐的白线是否根据回车、tab等操作自动填补 “trim_automatic_white_space”: true,

// Disables horizontal scrolling if enabled. // May be set to true, false, or “auto”, where it will be disabled for // source code, and otherwise enabled. // 是否自动换行,如果选auto,需要加双引号 “word_wrap”: false,

// Set to a value other than 0 to force wrapping at that column rather than the // window width // 设置窗口内文字区域的宽度 “wrap_width”: 0,

// Set to false to prevent word wrapped lines from being indented to the same // level // 防止被缩进到同一级的字换行 “indent_subsequent_lines”: true,

// Draws text centered in the window rather than left aligned // 如果没有定义过,则文件居中显示(比如新建的文件) “draw_centered”: false,

// Controls auto pairing of quotes, brackets etc // 自动匹配引号,括号等 “auto_match_enabled”: true,

// Word list to use for spell checking // 拼写检查的单词列表路径 “dictionary”: “Packages/Language – English/en_US.dic”,

// Set to true to draw a border around the visible rectangle on the minimap. // The color of the border will be determined by the “minimapBorder” key in // the color scheme // 代码地图的可视区域部分是否加上边框,边框的颜色可在配色方案上加入minimapBorder键 “draw_minimap_border”: false,

// If enabled, will highlight any line with a caret // 突出显示当前光标所在的行 “highlight_line”: false,

// Valid values are “smooth”, “phase”, “blink”, “wide” and “solid”. // 设置光标闪动方式 “caret_style”: “smooth”,

// Set to false to disable underlining the brackets surrounding the caret // 是否特殊显示当前光标所在的括号、代码头尾闭合标记 “match_brackets”: true,

// Set to false if you’d rather only highlight the brackets when the caret is // next to one // 设为false时,只有光标在括号或头尾闭合标记的两端时,match_brackets才生效 “match_brackets_content”: true,

// Set to false to not highlight square brackets. This only takes effect if // match_brackets is true // 是否突出显示圆括号,match_brackets为true生效 “match_brackets_square”: false,

// Set to false to not highlight curly brackets. This only takes effect if // match_brackets is true // 是否突出显示大括号,match_brackets为true生效 “match_brackets_braces”: false,

// Set to false to not highlight angle brackets. This only takes effect if // match_brackets is true // 是否突出显示尖括号,match_brackets为true生效 “match_brackets_angle”: false,

// Enable visualization of the matching tag in HTML and XML // html和xml下突出显示光标所在标签的两端,影响HTML、XML、CSS等 “match_tags”: true,

// Highlights other occurrences of the currently selected text // 全文突出显示和当前选中字符相同的字符 “match_selection”: true,

// Additional spacing at the top of each line, in pixels // 设置每一行到顶部,以像素为单位的间距,效果相当于行距 “line_padding_top”: 1,

// Additional spacing at the bottom of each line, in pixels // 设置每一行到底部,以像素为单位的间距,效果相当于行距 “line_padding_bottom”: 1,

// Set to false to disable scrolling past the end of the buffer. // On OS X, this value is overridden in the platform specific settings, so // you’ll need to place this line in your user settings to override it. // 设置为false时,滚动到文本的最下方时,没有缓冲区 “scroll_past_end”: true,

// This controls what happens when pressing up or down when on the first // or last line. // On OS X, this value is overridden in the platform specific settings, so // you’ll need to place this line in your user settings to override it. // 控制向上或向下到第一行或最后一行时发生什么(没明白也没试出来) “move_to_limit_on_up_down”: false,

// Set to “none” to turn off drawing white space, “selection” to draw only the // white space within the selection, and “all” to draw all white space // 按space或tab时,实际会产生白色的点(一个空格一个点)或白色的横线(tab_size设置的制表符的宽度),选中状态下才能看到 // 设置为none时,什么情况下都不显示这些点和线 // 设置为selection时,只显示选中状态下的点和线 // 设置为all时,则一直显示 “draw_white_space”: “selection”,

// Set to false to turn off the indentation guides. // The color and width of the indent guides may be customized by editing // the corresponding .tmTheme file, and specifying the colors “guide”, // “activeGuide” and “stackGuide” // 制表位的对齐白线是否显示,颜色可在主题文件里设置(guide,activeGuide,stackGuide) “draw_indent_guides”: true,

// Controls how the indent guides are drawn, valid options are // “draw_normal” and “draw_active”. draw_active will draw the indent // guides containing the caret in a different color. // 制表位的对齐白线,draw_normal为一直显示,draw_active为只显示当前光标所在的代码控制域 “indent_guide_options”: [“draw_normal”],

// Set to true to removing trailing white space on save // 为true时,保存文件时会删除每行结束后多余的空格 “trim_trailing_white_space_on_save”: false,

// Set to true to ensure the last line of the file ends in a newline // character when saving // 为true时,保存文件时光标会在文件的最后向下换一行 “ensure_newline_at_eof_on_save”: false,

// Set to true to automatically save files when switching to a different file // or application // 切换到其它文件标签或点击其它非本软件区域,文件自动保存 “save_on_focus_lost”: false,

// The encoding to use when the encoding can’t be determined automatically. // ASCII, UTF-8 and UTF-16 encodings will be automatically detected. // 编码时不能自动检测编码时,将自动检测ASCII, UTF-8 和 UTF-16 “fallback_encoding”: “Western (Windows 1252)”,

// Encoding used when saving new files, and files opened with an undefined // encoding (e.g., plain ascii files). If a file is opened with a specific // encoding (either detected or given explicitly), this setting will be // ignored, and the file will be saved with the encoding it was opened // with. // 默认编码格式 “default_encoding”: “UTF-8″,

// Files containing null bytes are opened as hexadecimal by default // 包含空字节的文件被打开默认为十六进制 “enable_hexadecimal_encoding”: true,

// Determines what character(s) are used to terminate each line in new files. // Valid values are ‘system’ (whatever the OS uses), ‘windows’ (CRLF) and // ‘unix’ (LF only). // 每一行结束的时候用什么字符做终止符 “default_line_ending”: “system”,

// When enabled, pressing tab will insert the best matching completion. // When disabled, tab will only trigger snippets or insert a tab. // Shift+tab can be used to insert an explicit tab when tab_completion is // enabled. // 设置为enabled时,在一个字符串间按Tab将插入一个制表符 // 设置为true时,按Tab会根据前后环境进行代码自动匹配填补 “tab_completion”: true,

// Enable auto complete to be triggered automatically when typing. // 代码提示 “auto_complete”: true,

// The maximum file size where auto complete will be automatically triggered. // 代码提示的大小限制 “auto_complete_size_limit”: 4194304,

// The delay, in ms, before the auto complete window is shown after typing // 代码提示延迟显示 “auto_complete_delay”: 50,

// Controls what scopes auto complete will be triggered in // 代码提示的控制范围 “auto_complete_selector”: “source – comment”,

// Additional situations to trigger auto complete // 触发代码提示的其他情况 “auto_complete_triggers”: [ {“selector”: “text.html”, “characters”: “<"} ],

// By default, auto complete will commit the current completion on enter. // This setting can be used to make it complete on tab instead. // Completing on tab is generally a superior option, as it removes // ambiguity between committing the completion and inserting a newline. // 设为false时,选择提示的代码按回车或点击可以输出出来,但选择true时不会输出而是直接换行 “auto_complete_commit_on_tab”: false,

// Controls if auto complete is shown when snippet fields are active. // Only relevant if auto_complete_commit_on_tab is true. // auto_complete_commit_on_tab必须为true,控制代码提示的活跃度(没明白…) “auto_complete_with_fields”: false,

// By default, shift+tab will only unindent if the selection spans // multiple lines. When pressing shift+tab at other times, it’ll insert a // tab character – this allows tabs to be inserted when tab_completion is // enabled. Set this to true to make shift+tab always unindent, instead of // inserting tabs. // 设置为false,使用Shift + tab总是插入制表符 “shift_tab_unindent”: true,

// If true, the selected text will be copied into the find panel when it’s // shown. // On OS X, this value is overridden in the platform specific settings, so // you’ll need to place this line in your user settings to override it. // 选中的文本按Ctrl + f时,自动复制到查找面板的文本框里 “find_selected_text”: true,

// // User Interface Settings //

// The theme controls the look of Sublime Text’s UI (buttons, tabs, scroll bars, etc) // Data\Packages\Theme – Default\Default.sublime-theme控制软件的主题 “theme”: “Default.sublime-theme”,

// Set to 0 to disable smooth scrolling. Set to a value between 0 and 1 to // scroll slower, or set to larger than 1 to scroll faster // 滚动的速度 “scroll_speed”: 1.0,

// Controls side bar animation when expanding or collapsing folders // 左边边栏文件夹动画 “tree_animation_enabled”: true, // 标签页的关闭按钮 “show_tab_close_buttons”: true,

// OS X 10.7 only: Set to true to disable Lion style full screen support. // Sublime Text must be restarted for this to take effect. // 针对OS X “use_simple_full_screen”: false,

// Valid values are “system”, “enabled” and “disabled” // 水平垂直滚动条:system和disabled为默认显示方式,enabled为自动隐藏显示 “overlay_scroll_bars”: “system”,

// // Application Behavior Settings //

// Exiting the application with hot_exit enabled will cause it to close // immediately without prompting. Unsaved modifications and open files will // be preserved and restored when next starting. // // Closing a window with an associated project will also close the window // without prompting, preserving unsaved changes in the workspace file // alongside the project. // 热推出功能!退出时不会提示是否保存文件,而是直接退出 // 下次打开软件时,文件保持退出前的状态,没来得及保存的内容都在,但并没有真实的写在原文件里 “hot_exit”: true,

// remember_open_files makes the application start up with the last set of // open files. Changing this to false will have no effect if hot_exit is // true // 软件使用最后的设定打开文件,hot_exit为true时没有效果 “remember_open_files”: true,

// OS X only: When files are opened from finder, or by dragging onto the // dock icon, this controls if a new window is created or not. // 针对OS X “open_files_in_new_window”: true,

// Set to true to close windows as soon as the last file is closed, unless // there’s a folder open within the window. This is always enabled on OS X, // changing it here won’t modify the behavior. // 针对OS X “close_windows_when_empty”: true, // 哪些文件会被显示到边栏上 // folder_exclude_patterns and file_exclude_patterns control which files // are listed in folders on the side bar. These can also be set on a per- // project basis. “folder_exclude_patterns”: [“.svn”, “.git”, “.hg”, “CVS”], “file_exclude_patterns”: [“*.pyc”, “*.pyo”, “*.exe”, “*.dll”, “*.obj”,”*.o”, “*.a”, “*.lib”, “*.so”, “*.dylib”, “*.ncb”, “*.sdf”, “*.suo”, “*.pdb”, “*.idb”, “.DS_Store”, “*.class”, “*.psd”, “*.db”], // These files will still show up in the side bar, but won’t be included in // Goto Anything or Find in Files “binary_file_patterns”: [“*.jpg”, “*.jpeg”, “*.png”, “*.gif”, “*.ttf”, “*.tga”, “*.dds”, “*.ico”, “*.eot”, “*.pdf”, “*.swf”, “*.jar”, “*.zip”],

// List any packages to ignore here. When removing entries from this list, // a restart may be required if the package contains plugins. // 删除你想要忽略的插件,需要重启 “ignored_packages”: [“Vintage”] }

来自:http://hp.dewen.org/?p=1361

0 Comments

There are no comments yet

Leave a comment

Your email address will not be published.